S17 Spinning Wheel
S17 Spinning Wheel
Louët
The S17 is the longstanding workhorse of the Louët spinning wheel range.
It offers the beginner spinner an enjoyably predictable spinning experience without any finicky pre-spin setup or mid-spin twitchy tensioning issues.
For those with a bit more experience and perhaps spinning for speed and production, it’s big-hearted take-up and huge bobbin capacity definitely won’t disappoint.
It’s geared for three speeds to help you expertly manage twist entering the forming yarn. Start low for a beginner or perhaps to spin bulky art yarns, then increase your ratio as your coordination improves and your interest in spinning a range of fibres and yarns grow.
The Irish tension drive system, where the main wheel drives the bobbin (rather than the flyer), is known for its ability to deliver consistent tension throughout an entire spin. This allows you to almost ‘set-and-forget’ creating a more meditative spinning experience.
Louët are highly regarded for their craftsmanship and commitment to functional design. There is no doubt that the natural timber finish and contemporary aesthetic will appeal to the modern spinner.
This wheel and the inclusions listed below are in stock and ready to ship or collect in-store today!
Features You’ll Love
An Irish tension drive system, well known for its simplicity and spinning consistency.
Geared for three speeds to help you expertly manage twist entering the forming yarn.
An indispensable hooked flyer, designed to help you smoothly and completely fill bobbins, and allow you to lace the hooks to reduce yarn take-up when spinning finer threads.
Fuss-free bobbin changes, it’s as easy as releasing the flyer brake, parking the drive band and lifting out the flyer and bobbin.
A handy drive-band brake at the back of the flyer shaft – a favourite design feature at Loom & Spindle! This means you can ‘park’ the drive-wheel when changing bobbins or the wheel is not in use.
An inventive yet simple solution for attaching the leader yarn to the bobbin – just make a knot in the leader yarn and slip it into a pre-made slot on the bobbin shaft.
An orifice diameter of 13mm that will accommodate a wide range of yarn thicknesses.
With the same technical specifications as the Louët S10 Concept wheels, there are a range of accessories available to customize your wheel for different spinning experiences.
A classic minimalist design with a contemporary feel that has well and truly stood the test of time.
INCLUSIONS
S17 Spinning wheel (see specifications below)
3 Irish tension bobbins
Black poly drive band
Built-in Lazy Kate for two bobbins
Self-assembly kit with 8 page step-by-step instruction manual
S17 SPECIFICATIONS
Single treadle
Irish Tension (bobbin led) drive system
Wheel: ø 50cm (19.75'')
Flyer: Irish tension, natural timber finish, with hooks
Orifice: ø 13mm (.5''), height 69cm (27.2'')
Bobbins: Irish Tension ‘standard’, natural timber finish
Bobbin ratios: 1:5.5, 1:7.5, 1:10.5
Bobbin capacity: 690 cm3 (42.4 cubic inch)
Weight: 5kg (11lb)
Made from high quality, laminated birch and European hardwood
Natural timber finish
Made in the Netherlands
ASSEMBLY
The Louët S17 comes partially assembled. A self-assembly kit is included that has everything you need to complete the setup, including a screwdriver!
Please note, this spinning wheel has no protecting finish. As a preventive measure against drying-out, warping or cracking Louët recommends sealing the timber with lacquer, stain or wax prior to assembly. A small sheet of sand paper is included for any edges that may need a touch up prior to finishing.
For more information about what’s included in the box and assembly requirements please refer to the manual provided by Louët.
Louët S17 Instruction Manual: Download Here
Assembly video by Louët:
CUSTOMISATION AND ACCESSORIES
The S17 spinning wheel is compatible with a range of accessories. This range includes:
Irish tension flyer with sliding hooks
Bulky (art yarn) flyer with sliding hooks, orifice ø 20mm (.75'')
Bulky (art yarn) bobbins, with ratios: 1:4 / 1:5 / 1:6.
High-speed flyer with sliding hooks
High-speed bobbins, regular or fat-core, ratios: 1:6.5 / 1:9.5 / 1:15
Stand Alone Lazy Kate
For custom order enquiries please get in touch to discuss your needs. We would love to help you out!
ALSO IN THIS RANGE
IMPORTANT INFORMATION
We have done our best to represent the materials and texture of this product as accurately as possible.
Please note the S17 is restricted to a single treadle set up with Irish tension (bobbin led) drive system, the treadle can only be positioned on the righthand side of the front post.
Please review our shop policies and shipping information when placing an order.
